|
|
| |
Workroom Supplies
Notes |
|
Foam
- Poly Foam:
+ can be used for seats, chairs, cushions, benches, and mattresses.
+ Typical life of 1-2 years.
+ Density: 1.3 lb/cubic feet with a compression
of 34-40 lbs
- High Quality
+ can be used for seats,
chairs, cushions, benches, and mattresses.
+ Typical life of 5 years.
+ Density: 2.8 lb/cubic feet with a compression
of 34-40 lbs
- Dacron Wrap
+ Adds comfort and gives a
more rounded look to your cushions.
+ Helps the foam slide much easier into the fabric when compared to
just foam only.
|
How to
minimize stretch and
reduce friction of the cord.
-
Step 1: Knot the cords together (below the screw
eye or cord lock)
-
Step 2: Divide the cord in 2 or 3 sections.
-
Step 3: Braid.
-
Step 4: Knot at the end (the braids don't loose)
|
Heavy Duty Drapery Hooks
- Each Drapery Hook measures 1-1/2" high.
- Designed to make the pleats straighter,
slide
into the fabric and
to hold the heading away from the rod
-
Will be
use with decorative traverse rods and
pinch-pleated with 4" heading.
-
Will be use with
decorative rods with rings and small
pinch-pleated (French pleats).
-
Will be use with
decorative rods with rings and Flat panel.
-
Heavy Duty hooks are a thicker
gauge steel than the regular Duty hooks.
- Steel with Zinc Chromate
finish: Not to be used on Flameproof
fabrics, The retardant chemical in Flameproof
fabrics reacts with the zinc coating on hooks
and causes them to rust into the drape.
- Stainless Steel Heavy Duty Hooks: used on Fire
Retardant, Flameproof fabrics.
|
Sew-On Plastic Rings, Brass Rings
- Will used for fabric shades, tie-backs,
etc.
|
Weights
- Weights can help drapery and curtains hang
smoothly; minimize the fluttering caused by a
breeze.
- Plastic Covered Weights 1" x 1" and
Uncovered Curtain Weights 1" x 1"are placed
inside each lower corner of the drapery or
curtain.
- Weighted Braid are small metal pellets
enclosed in a cloth tube. Weighted Braid
are slipped inside the fold of a hem (cut
length same as the length of the fabric)
|
|
|
|
|
